相关文章

·电加热反应釜与远红外电加热反应釜的区别

下面反应釜网的小编跟大家介绍电加热反应釜与远红外电加热反应釜的区别。

电加热不锈钢反应釜

是双层反应釜,内胆和外壳之间有一定空间,利用电加热管发热来提供热量传递给导热油介质,然后通过导热油油浴把热量传递给反应釜

内胆,与内胆接触的物料介质通过钢板的热量来进行升温,慢慢的达到物料反应所需温度。电加热管的安装方式:电加热管通过法兰连接,介入反应釜夹层油浴内,电加热管的根数及功率不同来组合成所需总功率,电加热管一般为220v/380v电压,220v电加热管必须三根为一组,星形连接来组合成三项供电所需(一般工业生产不采用直接单项接线方式)。380v电加热管可以直接接入三项380v电压,380v电加热管一般单根功率较高。电加热反应釜配电加热管根数为3的倍数,通过三根为一组,可以根据所需电加热管总根数组合成多组,圆周分区域、分功率加热,温度在300摄氏度以内。

远红外电加热反应釜

为单层反应设备,以前我已经介绍过,是通过电阻丝发热把热量传递给远红外发射装置,远红外通过短波断把热量直接辐射到物料介质中,可以形成无死角、各区域物料分子结构均匀的升温。远红外接线方式电加热一致。但远红外装置可以组合成圆周分区域、上下分区域加热,电加热功率数直线微调,通过调节加热功率的百分比来实现,加热温度在600度以内。

英文:The following reaction kettle network of small series with you to introduce electric heating reaction kettle and far infrared electric heating reaction kettle difference.

Electrical heating stainless steel reaction kettle is double reactor, between the liner and the shell has certain space, the heating of the electric heating tube to provide heat transfer to a heat conducting oil medium and through the heat conducting oil bath to heat transfer to the reactor tank, is in contact with the inner liner materials by steel plate heat to heat up, slowly to the material response required temperature. The electric heating tube is installed in the electric heating pipe through the flange connection, the electric heating pipe is connected with the electric heating pipe in the oil bath. The electric heating pipe is 220v/380v voltage. The 220V electric heating pipe must be three. 380V electric heating tube can be directly connected to three 380V voltage, 380V single high power electric heating tube. Electric heating reaction kettle distribution heating pipe root number is 3, through three for a group, can according to the need of electric heating tube total root array synthesis many groups, the circumference of the region, sub power heating, temperature in 300 degrees celsius.

Far infrared electric heating reaction kettle for single layer reaction equipment, before I have introduced, is through the resistance wire heat transfer to the far infrared emission device, far infrared radiation to the material medium by short wave, can form no dead ends, the regional structure of the molecular structure of uniform temperature. Far infrared connection mode electric heating. But far infrared device can be combined into a circular sub region, the upper and lower sub regional heating, electric heating power of a straight line to adjust, by adjusting the percentage of heating power, heating temperature in 600 degrees or less.